Filtration column, stainless steel, 47 cm, for adjusting flavour and aroma of water and liquor

• ​Adjustment of flavour and smell - the filtration column makes it easier to harmonise potable water and liquor.
• Indispensable addition - the column requires using activated carbon, which is also available in our offer.
• High quality - the column is made of robust stainless steel, thanks to which it will serve you for many years.
• Capacious - the column can hold 450 mL of activated carbon at once.
• Technical data: pipe outer diameter - 5 cm, filter height - 47.5 cm, total height - 48 cm.

Do you want your potable water to be properly purified and free of unwanted flavours and aromas? Do you make your own liquor and want to make sure it is of the highest quality? This filtration column will allow you to perform harmonisation, i.e. adjustment of flavour and aroma, while at the same time making sure that the liquid in it is as pure as possible. The ingredient required for that process is activated carbon (also available in our offer), which is perfect at absorbing all kinds of unwanted contamination and aromas. By using this whole kit the substances having a negative impact on the quality of liquor and water will be absorbed thanks to the strongly porous structure of carbon and you will be able to enjoy the characteristic specificity of flavour and aroma of distillates, valued by a large number of enthusiasts. The filtration column is made of high quality stainless steel, thanks to which it will serve you for many years. Use our company’s silicon hose in order to take advantage of the full potential of this device.

How to use:
Note! The filtration column requires a clamp and a hose in order to work. These elements are not included in the set!
 
1. Measure the right length of the silicon hoses for the upper and lower stub pipe and then pull them onto the stub pipes. Install the clamp intended for setting the flow rate of the liquid to be filtered on the hose connected to the lower stub pipe.
2. Pour activated carbon into the filter (prepared in advance in line with the instructions on the packaging) in such an amount that it fills the filter up to the height of about 1-2 cm below the upper transfer stub pipe.
3. Pour the liquid intended for filtration into the carbon-filled column from above, up to about 3/4 of its height.
4. Lower the hose connected to the lower stub pipe and unlock the clamp so that the liquid from the column starts flowing down through the hose. Once the liquid is at its top, place the hose quickly in the container with the liquid to be filtered and then place the whole container above the filtration column.
5. Adjust the liquid flow rate using the clamp.
6. Put the transfer hose connected to the upper stub pipe in the container intended for receiving the liquid filtered.

Column specifications:
Material: stainless steel
- two stub pipes with diameter of 8mm, intended for silicone hoses,
- foot/base - enabling placing the column on a flat surface,
- pipe outer diameter - 5 cm,
- filter height - 47.5 cm
- total height with base - 48 cm,
- the column can hold 450 mL of activated carbon at once.

Note!
The rules of production of alcohol on the territory of the Republic of Poland are regulated by the following acts: the act of 2nd of March 2001 on production and bottling of wine products, trading these products, and organisation of the wine market, and the act of 18th of October 2006 on production of spirit drinks, their registration, and protection of geographical indications of spirit drinks. BROWIN Sp. z o. o. Sp. k. company is not liable for its products being used in a way that does not comply with binding provisions of the law.

CAUTION!

Every country has its own legal regulations governing the manufacturing of ethyl alcohol, wine products, and spirits, introducing them onto the market, and regarding sanctions for non-compliance.