Transparent 30 L fermentation vessel with a rotary tap and lid with a scale—for fermenting beer, wine and sugar washes


  • Durable and flexible – this 30 L fermentation vessel is made from transparent, food-safe plastic, allowing you to monitor the progress of fermentation without opening the lid. It won’t deform, is resistant to discolouration and is suitable for fermenting beer, wine and sugar washes.
  • Versatile design – the vessel’s wide lid has an opening for a fermentation airlock. You can also modify the vessel yourself by adding another opening beneath the rim, allowing you to fit an angled airlock and ferment in several vessels stacked on top of one another.
  • Easy transfer of your drinks – the included rotary drain tap lets you draw off beer, wine or other fermented liquids from above the sediment. Its position does not prevent you from placing the vessel on a flat surface.
  • Stopper included – the set includes a universal stopper with a plug, so you can fit a fermentation airlock or seal the vessel tightly when necessary.
  • Convenient scale – the printed volume scale makes it easy to monitor the amount of liquid in the vessel. Helpful tips on making homemade wine, beer and cured meats will also make preparing your homemade specialities easier.


This economical complete set gives you everything you need to prepare your favourite homemade drinks. The 30 L vessel is made from highly durable and flexible, transparent food-safe plastic. This allows you to monitor the progress of fermentation without opening the lid. The vessels have PZH certification for contact with food and are resistant to discolouration caused by contact with tannins from fruit. The included lid with an opening and universal stopper with a plug allow you either to seal the vessel or fit a fermentation airlock. Adding a side opening yourself allows you to install an angled airlock and ferment in several vessels stacked on top of one another at the same time. The included rotary tap makes it easy to draw off beer, wine and other fermented liquids from above the sediment.


The vessel and lid are made from polypropylene. The product is BPA-free.


Instructions for use:

To make the vessel easier to open, lift the lid slightly by gently pulling on the handle. Insert, for example, the handle of a spoon into the resulting gap, then run it around the rim of the vessel.

Do not clean the vessels with abrasive scourers, as these may scratch the surface and create places where contamination can develop.

When fitting the tap to the vessel, place the gasket on the outside of the vessel. This ensures a complete seal.


NOTE: You can improve the seal further by coating the rim of the vessel with petroleum jelly or cooking oil. Before preparing your wash, thoroughly sanitise the fermentation vessel with potassium metabisulphite.


Maximum permitted temperature of the contents: 85°C.

The vessels should be at a minimum temperature of 5°C before filling.

Maximum alcohol concentration of the contents: 50%.


The set includes:

  • 30 L fermentation vessel with a scale and labels in Polish
  • lid with an opening
  • universal stopper with a plug
  • rotary drain tap


The lid is also available separately – if the lid is damaged or lost, you can purchase a replacement without having to buy a new vessel. Compatible lid: 340431.


Product dimensions:

  • capacity 30 L
  • vessel height 36.9 cm
  • vessel height with lid 37.1 cm
  • Ø lid opening 1.6 cm
  • length including handles 40.3 cm
  • width / external Ø 37.9 cm
  • internal vessel Ø 35.5 cm
  • opening positioned 2–3 cm from the bottom of the vessel
  • Ø vessel opening 2.8 cm
  • tap length when fitted 8 cm
  • tap height 7.8 cm
  • Ø tap outlet 1.1/1.2 cm


Storage with protection from UV radiation

To prevent damage caused by UV radiation, empty or filled vessels must not be stored outdoors. If this is not possible because of the storage conditions, the vessels and lids must be stored in a way that protects them from UV radiation. For example, pallets containing the vessels and lids can be covered with a plastic tarpaulin resistant to UV radiation.

 

Storage of empty vessels

As the vessels and lids are sensitive to atmospheric conditions, they should be stored in a dry place at a constant temperature. This not only protects them from moisture but also effectively prevents condensation, which can damage packaging decorated with an offset print, IML application or digital print. Furthermore, despite the use of an antistatic agent, contamination by dust or dirt cannot be ruled out, so the vessels must be stored in a clean room.