86 Days Pilsner Extract is produced by mashing finely ground malted barley with water at a temperature not exceeding 75C, then filtering and evaporating the resulting liquid under vacuum until it is the consistency of thick honey. The resulting beer is a fresh golden colour with a subtle malty sweetness, elegant refined herbal notes with a refreshingly clean, crisp bitter finish Characteristic:
Product from australian company-Coopers is produced for making 23 l of beer.
.Each can contain:
-1,7 kg of hermetic closed hop malt without any extra preservanties( Malt consistency is similar to carmel/honey)
-the packet of beer yeast (attached under the cover)
Maximum alcohol level, which we may achive is 5,2%(We can also achive lighter beers if we reduce the amount of sugar.)Using attached table, you can choose the proper amount of sugar for particular barrel and for require beer power.
|Amount of sugar
Preparing homemade beer is really simple but you have to remember about keeping cleanness and proportion.
Cooper's concentrant (with beer yeast packet attached )
1 kg of sugar or - enhancer or - for exapmle malt extract light or -Enhancer
glass demijohn or 30 l zymotic container
-measuring spoon for sugar
-bottles for pouring beer or plastic bottles.
Next steps of beer preparation
Closed can with digest put to the sink with hot water for about 10 minutes. (it will make our content liquefied and make it easier to put it out)
Into 5 l vessel put 1 kg of sugar. (Attention : sugar may be replaced with enhancer or malt)
we add 2 l of boiling water and mix till sugar will melt, next add the content of the can and mix it again. The final temperature of beer should be about 21-21°C. If so, you should add beer yeast from the packet. (Attention: remember that the temperature over 30° will kill the yeast. Fermentation will not start in the temperature under 18°C.)
After adding the yeast, mix everything and close the mouth of the vessel (demijohn) and put the fermenative straw in the cork.
Approved fermentation te