Fermentation bucket 30 L with printing and tap

The containers feature a printed capacity scale (on two sides of the container), as well as valuable hints for preparing homemade wine, beer, and processed meat.​ 

​

• Resilient and flexible - this fermentation container is made of plastic intended for contact with food. It does not get deformed, it is resistant do discolouration, and it is suitable for fermenting beer or wine.
• Versatile design - the wide lid of the container features and opening for an airlock. One can also modify the container on their own in a way that enables installing an angular tube.
• Plug included in the set - each complete container set includes universal fermentation stopper with plug, to be able to use an angular airlock instead of a traditional one or to close the container tightly if necessary.
• Easy liquor decanting - the discharge tap included enables complete decanting of beer or wine. The location of the tap does not interfere with turning the container around or placing it on flat surfaces.
• Convenient scale - on both sides of the container there is a capacity scale that enables checking the amount of the batch, as well as valuable hints regarding preparation of homemade wine, beer, and processed meat.

It is a cost-effective complete set that will allow you to prepare your favourite homemade liquor. The container is made of white plastic approved for contact with food, resistant to deformation and discolouration, and not releasing any toxic dyes to the batch.

The lid with an opening and fermentation stopper with plug included in the kit enable sealing the container or installing an airlock. Drilling an extra opening allows installing an angular tube and conducting fermentation in multiple stacked containers.

In order to open the container, it is necessary to pull the handle, open the lid slightly, slide a flat object into the resulting gap, and the pull that object around the edge of the container.

It is not recommended to clean the containers using rough washcloths.

When installing the tap on the container it is necessary to place the gasket on the outer side of the container. This ensures full tightness.

Container and lid made of polypropylene, BPA-free product.

Smearing petroleum jelly or edible oil on the container edges provides additional sealing.

Maximum batch temperature allowed: 85°C.

The temperature of the containers prior to filling should be at least 5°C.

Maximum alcohol concentration in the batch: 50%.

The set includes:

- a 30 L fermentation container with a scale

- a lid with an opening

- fermentation stopper with plug - universal.

Storage with UV Protection

To prevent damage caused by UV radiation, empty or filled containers must not be stored outdoors. If this is not possible due to storage conditions, containers and lids should be stored in a way that protects them from UV radiation. This can be done, for example, by covering pallets with containers and lids with a UV-resistant plastic tarpaulin.

Storage of Empty Containers

Since containers and lids are sensitive to weather conditions, they should be stored in a dry place at a constant temperature. This not only protects them from moisture but also effectively prevents water condensation, which could damage packaging, particularly those decorated with offset prints, IML applications, or digital prints. Furthermore, despite the use of antistatic agents, dust or dirt contamination cannot be ruled out, so storage in a clean room is necessary.

CAUTION!

Every country has its own legal regulations governing the manufacturing of ethyl alcohol, wine products, and spirits, introducing them onto the market, and regarding sanctions for non-compliance.