OXI TURBO sodium percarbonate - a washing agent for winemaking and beer brewing

• A reliable agent - OXI TURBO Sodium Percarbonate (active oxygen) is a proven disinfecting and washing agent for winemaking, beer brewing, and distilling equipment – particularly for cleaning prismatic copper springs.
• This product ins environmentally friendly - when using OXI TURBO you do not have to worry about its negative impact on the environment. An additional advantage of the OXI TURBO agent is the fact that it does not require additional rinsing of the equipment with water after being used on it.
• Comfortable use - the agent is odourless and when combined with water it dissolves and emits active oxygen, thanks to which it does not cause any discomfort or irritate with any unpleasant smell.
• Simple to use - after washing the equipment with a standard detergent, dissolve 1 teaspoon of OXI TURBO in 1 litre of warm water and mix the solution created. Next, wash the equipment in the solution for a few minutes.
• 1 packaging per 100 L of water - when using 4g/1L of water, a 400g packaging of the OXI TURBO agent is sufficient for producing as much as 100 litres of the solution for equipment washing.

OXI TURBO is a washing agent for winemaking, beer brewing, and distilling equipment, which is perfect also for cleaning prismatic springs. When combined with water, the preparation dissolves and emits active oxygen, thanks to which it is very effective, and you can be sure that your equipment is clean and safe for producing homemade liquors. OXI Turbo is an environmentally friendly agent. Odourless. Does not require rinsing of the washed equipment with water.

Dosage: Equipment washing: 4g/1L of water

Prismatic spring cleaning: 15-50 g/100g of springs.

Output: for 100 L of water.

How to use:

RINSING: Wash your equipment with a standard detergent. Next, dissolve 4 g (1 teaspoon) of OXI TURBO in 1 litre of warm water. Mix everything thoroughly until the preparation is dissolved. Wash the equipment in the solution so prepared for a few minutes.

PRISMATIC SPRING CLEANING:

Use 15-50 g per 100g of springs completely immersed in water. Wait for 30 minutes and then rinse the springs thoroughly.

CLEANING OF PRISMATIC COPPER SPRINGS: 

When combined with citric acid, OXI TURBO becomes an extremely effective and fast way to restore their previous shine and, most importantly, their function. Use 4-6 teaspoons of citric acid and 1-2 teaspoons of OXI per 0.5 L. Pour hot water over the ingredients. Please note! The reaction is turbulent. Remain cautious. When the reaction is over, rinse the springs thoroughly with cold water. Leaving Oxi on the surface of the springs may cause them to oxidise (darken) again. If necessary, repeat the process to make the springs completely clean. It is the ideal way when time is pressing!